LW2 V6-3.0L VIN R (2000)
Installation
1. Install throttle body and new gasket.
2. Install throttle body nut.
Torque: 8 N.m (71 in-lbs)
3. Attach vacuum lines, EVAP hose and coolant lines to throttle body.
4. Install intake plenum bolts.
Torque: 8 N.m (71 in-lbs)
5. Connect intake plenum-to-runner hose clamps using J-43914. If clamps are damaged, replace with service screw type clamps.
6. Connect throttle body electrical connector.
7. Install air cleaner inlet hose.
