LW2 V6-3.0L VIN R (2000)
4. Install ignition switch and reconnect ignition switch connector.
Torque: 1.5 N.m (14 in-lbs)
5. Install shroud fasteners and steering column lower shroud panel.
Torque: 3 N.m (27 in-lbs)
IMPORTANT: Actuator blade within ignition module housing must be in the RUN position to install lock cylinder assembly. If rotated, replace it to
the RUN position using needle nose pliers.
6. Insert key into ignition lock cylinder and install into ignition module.
