saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Brake Light Switch|Diagrams > < Electrical - Stop Lamp/Cruise Switch Procedure Revision|Page 967
Page 1
background image

Brake Light Switch: Technical Service Bulletins
Stop Lamp Switch - Design Change

BULLETIN NO.: 00-T-46

ISSUE DATE: September, 2000

CATEGORY TYPE: Brakes-04

CATEGORY: Mechanical

CORPORATION NO.: 00-05-22-006

SUBJECT: 
Service Information Regarding a Design Change to Stop Lamp Switch and I/P Harness

MODELS AFFECTED: 
2000 Saturn L-Series vehicles built after and including VIN YY698906

PURPOSE: 
A design change was made during the 2000 model year to the stop lamp switch and instrument panel I/P harness. The new stop lamp switch part number
is 90508804 which is also used for the cruise brake switch and are interchangeable.

NOTICE

Do not attempt to modify the I/P harness in any 2000 L-Series vehicle to incorporate either 1st Design (P/N 90504499) or 2nd Design (P/N
90508804) in a vehicle that was not originally equipped with it from the manufacturer.

For replacement and adjustment of the stop lamp switch refer to "Stop Lamp Switch" and "Stop Lamp Switch Adjustment" procedures in the Mechanical
Brakes section of the 2000/2001 Brakes Service Manual.

PARTS REQUIREMENTS:

Disclaimer

Brake Light Switch|Diagrams > < Electrical - Stop Lamp/Cruise Switch Procedure Revision|Page 967