LW2 V6-3.0L VIN R (2000)
34.
Select the correct tumblers for the desired code by the number stamped on the tumbler.
IMPORTANT:
Make sure the ignition cylinder housing side bar is in the correct orientation before attempting to insert tumblers.
35.
Install tumblers and tumbler springs.
36.
Place a new tumbler retainer plate into position and stake into ignition lock cylinder using Lock Cylinder Holding Fixture and Staking Tool
J43877.
36.1 Clamp staking tool holding fixture into a vise.
36.2 Place lock cylinder into staking tool holding fixture.
36.3 Tighten retaining screw.
