LW2 V6-3.0L VIN R (2000)
5. Install rear exhaust system with resonator attached.
Torque: 20 Nm (22 ft. lbs.)
NOTICE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors. Failure to do so can cause wheel bolts
to loosen in service.
6. Position wheel onto hub.
7. Install wheel bolts and tighten in a crisscross pattern. Repeat tightening pattern to make sure torque is correct.
Torque: 125 Nm (92 ft. lbs.)
8. Lower vehicle from hoist.
