LW2 V6-3.0L VIN R (2000)
Case: Service and Repair
Tools Required
-
SA105E Engine Support Bar Assembly
-
J-43405 Engine Support Fixture Adapter
-
J-41102 Axle Seal Protector
REMOVAL
CAUTION: MAKE SURE VEHICLE IS PROPERLY POSITIONED ON HOIST.
1. Position vehicle on hoist.
2. Remove battery.
a. Disconnect battery cables (negative first, positive second).
b. Move fan control module. Leave wiring connected, lift module up and away from bracket, and position out of the way.
c. Remove battery hold-down bracket.
d. Remove battery.
3. Disconnect battery feed to underhood fuse block.
4. Disconnect coolant hose from underhood fuse block.
5. Release retaining tabs on underhood fuse block cover and remove.
6. Release retaining tabs (2) on underhood fuse block and roll fuse block back (1) to access electrical connectors.
