LW2 V6-3.0L VIN R (2000)
7. Remove following connectors from underhood fuse block:
(1) Engine 68-way
(2) Forward Lamp 68-way
(3) I/P 68-way
(4) Forward Lamp 2-way (white)
(5) I/P 2-way (black)
(6) I/P 2-way (green)
(7) I/P 2-way (brown)
8. Lift fuse block off case.
IMPORTANT: There are two tabs that hold the hard shell grommets in place at the bottom of the grommet.
Disengage tabs to remove grommet from case.
9. Remove harnesses from underhood fuse block case by releasing retaining tabs on the bottom of the hard shell grommets.
a. Engine
b. Forward Lamp
c. Instrument Panel (I/P)
10. Remove underhood fuse block case fastener, and remove case from battery tray.
