LW2 V6-3.0L VIN R (2000)
Fluid - A/T: Service and Repair
Transaxle Fluid Checking Procedure
TRANSAXLE FLUID LEVEL CHECKING PROCEDURE
1. Start engine and operate vehicle until transaxle fluid temperature reaches at least 40° C (104° F).
2. Depress brake pedal and move shift lever through all gear ranges, pausing a few seconds in each range. Return shift lever to PARK range.
For Cylinder vehicles only, perform steps 3 through 5:
IMPORTANT: Note the original position of the A.I.R. components.
