LW2 V6-3.0L VIN R (2000)
Wheel Bearing: Service and Repair
Wheel Bearing/Hub Disassembly
DISASSEMBLY
-
TOOLS REQUIRED
-
SA91595 Front Wheel Bearing Remover/Installer
NOTICE: If hub or bearing is removed from the knuckle, a new bearing must be used during assembly.
1. Assemble wheel bearing/hub removal tool (SA9159S or equivalent) with part numbers:
-
1 - Hub driver
-
2 - Hub driver screw
-
3 - Bridge retainer
-
4 - Bridge
2. Secure entire setup in a vice (by bridge) as shown in illustration.