LW2 V6-3.0L VIN R (2000)
Transmission Position Switch/Sensor: Adjustments
TOOLS REQUIRED:
-
J41545 Transaxle Range Switch Alignment Tool
ADJUSTMENT
1. Shift Transaxle into NEUTRAL position.
2. Remove shift control cable from transaxle range switch lever.
3. Remove transaxle range switch lever nut and lever.
4. Loosen transaxle range switch bolts.
5. Insert J41545 as shown and rotate switch until tool drops into position.
6. Tighten transaxle range switch bolts.
Torque: 20 N.m (15 ft-lbs.)