LW2 V6-3.0L VIN R (2000)
Quarter Window Glass: Service and Repair
Quarter Window Replacement (Wagon)
Quarter Window Replacement (Wagon)
Removal Procedure
Caution: Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.
Notice: Refer to Paint Damage Notice in Cautions and Notices.
Notice: To protect paint from damage, tape quarter panel along/under quarter glass encapsulation using a thick tape.
1. If the quarter glass is to be reused, mark the location using masking tape or a grease pencil with the relationship to the roof outer-drip rail and
quarter panel. During installation, the marks can be aligned to guide the glass to the desired position.
2. Remove the rear upper garnish molding.
3. Remove the C-pillar trim.
4. Tape the quarter glass to the body, ensuring the glass is retained as the urethane is being cut.
5. Use a power glass removal tool around the perimeter of the quarter glass, being careful not to damage the finish on the quarter panel.
Caution: Refer to Urethane Smoke Caution in Cautions and Notices.
6. Remove the quarter glass and tape.
Installation Procedure