LW2 V6-3.0L VIN R (2000)
applying the urethane.
The primer area minimum width for A is 18 mm (0.71 in).
5. Install the upper windshield molding.
6. Install both lower windshield moldings.
7. Test fit the windshield and install the tape in 4 locations around the windshield and body.
8. Draw the alignment marks on the tape to assist in the alignment during installation.
9. Install the air inlet grill panel and nuts.
Tighten the air inlet grill panel nuts to 1 N.m (9 lb in).
10. Remove the windshield.