LW2 V6-3.0L VIN R (2000)
1.
Remove wiper arm finish cap by pulling upward on finish cap at pivot location.
2.
Mark current wiper arm locations on glass using tape or a wax pencil.
3.
Remove wiper arm retaining nut and washer. Discard nut.
4.
Lift wiper arm assembly away from windshield and remove wiper arm from pivot shaft.
5.
Obtain replacement wiper arm and wiper blade assemblies.
^
For driver side:
-
P/N22674551-Arm
-
P/N 22674553 - Blade
^
For passenger side:
-
P/N 22664287 - Arm
-
P/N 22674553 - Blade
6.
Install new wiper blades onto new wiper arms.
7.
Position wiper arms near bottom of windshield and align with previous marks.
NOTICE:
New nuts must be used. Torque retention of old nuts may not be sufficient.
8.
Install wiper arm retaining washer and a new nut (P/N 11096722).
Wiper Arm Retaining Nuts: 12 Nm (9 ft-lbs)
9.
Install wiper arm finish cap.
10.
Function wipers to ensure proper operation.
PARTS REQUIREMENTS:
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.
