LW200 L4-2.2L VIN F (2003)
5. Remove the center console fasteners.
6. Tilt front seats and console upward to allow carpet to be removed from under seat and console.
7. Remove the carpet from the vehicle.
Installation Procedure
1. Install the rear carpet in the vehicle making sure that the carpet is properly fit under the front seat and console.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the front seat bolts.
Tighten the bolts to 25 Nm (19 lb in).
3. Install the console fasteners.
Tighten the fasteners to 2.5 Nm (22 lb in).
