LW200 L4-2.2L VIN F (2003)
8. Install the water channel.
Tighten the driver side screw first, then the passenger side.
Tighten the screws to 4 Nm (35 lb in).
9. Install the sunroof window.
10. Install the sunroof module.
11. Operate the sunroof to the 1/4 open position.
12. Install the sunroof garnish molding by putting the sunroof in the vent position.
13. Install the sunroof garnish molding from the outside of the vehicle by pressing the sides to the sunroof module.
14. Install the 4 screws to the sunroof garnish molding.
Tighten the screws to 4 Nm (35 lb in).
