LW300 V6-3.0L VIN R (2001)
NOTICE: Use new nuts. Torque retention of old nuts may not be sufficient.
1. Position hub assembly and backing plate to knuckle and tighten using new nuts.
Torque: Rear Hub Assembly-to-Knuckle Nuts: 50 Nm (37 ft. lbs.) + 30° to 45°
2. Install parking brake cable.
3. Install wheel cylinder and fastener.
Torque: Wheel Cylinder-to-Backing Plate Bolt: 9 Nm (80 inch lbs.)
