LW300 V6-3.0L VIN R (2001)
4. Remove master cylinder to brake booster nuts.
NOTICE: Be careful not to bend brake pipes.
5. Remove master cylinder.
INSTALLATION
1. Position master cylinder onto booster studs and install nuts.
Torque: Master Cylinder-to-Brake Booster Nuts: 25 Nm (18 ft. lbs.)
NOTICE: Be careful not to bend brake pipes.
2. Position brake pipes into master cylinder and tighten nuts.
Torque: Brake Pipe-to-Master Cylinder Nuts: 18 Nm (13 ft. lbs.)
