LW300 V6-3.0L VIN R (2001)
Apply thread locking compound Loctite 272 or equivalent to the crankshaft bearing bridge adjusting sleeves.
Tighten crankshaft bearing bridge adjusting sleeves, using Bearing Bridge Sleeve Wrench J44628.
Torque: Crankshaft Bearing Bridge Adjusting Sleeves: 6 Nm (53 inch lbs.)
Tighten the crankshaft bearing bridge bolts.
Torque:
Crankshaft Bearing Bridge Bolts: 20 Nm (15 ft. lbs.)
