LW300 V6-3.0L VIN R (2001)
5. Remove liquid line to suction/liquid line assembly nut.
6. Install caps on liquid line and suction/liquid line assembly to prevent moisture entry and oil spillage.
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST. TO HELP
AVOID PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE
OPPOSITE END FROM WHICH COMPONENTS ARE BEING REMOVED.
7. Raise vehicle.
8. Remove radiator to condenser gasket by pulling down on one end and peeling back.
