LW300 V6-3.0L VIN R (2001)
5. Lower vehicle and install filler pipe upper bracket attachment screw.
Torque:
Fuel Fill Pipe-to-Body (Upper): 2.5 N.m (22 in-lbs)
6. Install rubber closeout grommet to body and filler pipe.
7. Install fuel cap.
8. Raise vehicle to comfortable working height.
NOTE: Ensure that the fuel pipe connecting hose is installed until it touches the fuel tank body. The hose clamp should be located within 6 mm (1/4
in.) of the end of the connecting hose.
9. Tighten hose clamp on filler pipe to fuel tank connecting hose.
Torque:
Fuel Fill Neck-to-Fuel Tank Clamp: 5 N.m (44 in-lbs)