RELAY AWD V6-3.5L VIN 8 (2005)
6. Disconnect the BTSI electrical connector (1).
7. Remove the BTSI screws (3).
8. Remove the BTSI (2) from the linear shift assembly.
Installation Procedure
1. Install the BTSI (2) to the linear shift assembly.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the BTSI screws (3).
^
Tighten the screws to 2 Nm (18 inch lbs.).
3. Connect the BTSI electrical connector (1).