RELAY AWD V6-3.5L VIN L (2006)
Center Sliding Door Roller: Service and Repair
Roller Bracket Replacement - Upper
Roller Bracket Replacement - Upper
Removal Procedure
1. Remove the sliding door garnish molding. Refer to Garnish Molding Replacement - Sliding Door (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Removal and Replacement) .
2. Remove the headliner trim finish molding. Refer to Headlining Trim Finish Molding Replacement (See: Interior Moulding /
Trim/Headliner/Service and Repair) in Interior Trim.
3. Support the sliding door.
4. Mark the location of the sliding door upper roller bracket (1) to the door (2) with a grease pencil.
5. Remove the sliding door upper roller bracket bolts.
6. Remove the sliding door upper roller bracket from the front edge of the upper track.
Installation Procedure