RELAY AWD V6-3.5L VIN L (2006)
Trim Panel: Procedures
Carpet Trim Plate Replacement - Rear Floor
CARPET TRIM PLATE REPLACEMENT - REAR FLOOR
REMOVAL PROCEDURE
1. Remove the rear seats.
2. Remove the locking clips from the bezel using a curved pick tool.
3. Remove the anchor plate bezel (1) from the floor.
INSTALLATION PROCEDURE
1. Press into place the anchor plate bezel (1) to the floor.
2. Press into place the locking clips to the bezel.
3. Install the rear seats.
Finish Panel Replacement - Upper Rear Trim
FINISH PANEL REPLACEMENT - UPPER REAR TRIM
TOOLS REQUIRED
J 38778 Door Trim Pad Clip Remover
REMOVAL PROCEDURE