RELAY AWD V6-3.5L VIN L (2006)
9. Remove the rear quarter trim panel retainers using J 38778.
10. Feed the seat belts through the openings in the trim panel.
11. Remove the rear quarter trim panel from the vehicle.
INSTALLATION PROCEDURE
1. Install rear quarter trim panel to vehicle.
2. Feed the seat belts through the openings in the trim panel.
3. Install the rear quarter trim retainers by aligning the retainer with the holes and then pushing the retainers to secure.
4. Install the upper cargo net retainers.
5. Install the liftgate sill plate.
6. Install the seat belt anchor retaining bolts.
7. Install the rear accessory panel cover.
8. Install the rear seat belt excushions.
9. Install the rear upper finish panel trim
10. Install the rear upper finish panel trim.
