RELAY AWD V6-3.5L VIN L (2006)
2. Install BPMV and EBCM as an assembly onto the mounting bracket studs.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the bolt that connects the BPMV assembly to the mounting bracket.
Tighten the bolt to 10 Nm (89 inch lbs.).
4. Install the BPMV bracket to the strut tower.
5. Install the 3 nuts (2) that attach the BPMV mounting bracket to the strut tower.
^
Tighten the nuts to 10 Nm (89 inch lbs.).
^
Reposition any lines or hoses that were moved out of place.
