RELAY AWD V6-3.5L VIN L (2006)
4. Install the lubricated boot (1) onto the brake caliper piston (2).
5. Lubricate the brake caliper piston (2) with clean brake fluid.
6. Install the brake caliper piston and the brake caliper piston boot into the bore of the caliper. Push the brake caliper piston to the bottom of the bore.
7. Seat the caliper boot in the caliper housing counterbore using the J 35777.
8. Install the caliper.
Brake Caliper Overhaul - Rear
Brake Caliper Overhaul - Rear
Removal Procedure
1. Caution: Refer to Brake Dust Caution in Service Precautions.
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Service Precautions.
Remove the rear brake caliper from vehicle.
