RELAY AWD V6-3.5L VIN L (2006)
Heater Hose: Service and Repair
Heater Hose/Pipe Replacement - Inlet/Outlet
HEATER HOSE/PIPE REPLACEMENT - INLET/OUTLET
TOOLS REQUIRED
SA9111E (SA911E) Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill LX9) Draining and Filling Cooling System (Static Fill LZ9)
Draining and Filling Cooling System (Vac-N-Fill).
2. Release the quick connect.
3. Disconnect the inlet heater hose (1) at the engine.
4. Disconnect the outlet heater hose (2) at the engine.
