RELAY AWD V6-3.5L VIN L (2006)
Canister Purge Solenoid: Service and Repair
EVAPORATIVE EMISSION CANISTER PURGE SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the electrical connector (6) from the evaporative emission (EVAP) canister purge valve (5).
2. Disconnect the EVAP canister purge pipe from the EVAP canister purge valve.
3. Remove the EVAP canister purge valve bolt (1).
4. Remove the EVAP canister purge valve (3) and gasket (2) from the intake manifold.
INSTALLATION PROCEDURE
