RELAY AWD V6-3.5L VIN L (2006)
Canister Vent Valve: Service and Repair
Evaporative Emission Canister Vent Solenoid Valve Replacement (Short Wheel Base)
EVAPORATIVE EMISSION CANISTER VENT SOLENOID VALVE REPLACEMENT (SHORT WHEEL BASE)
REMOVAL PROCEDURE
1. Remove the fuel tank.
2. Disconnect the electrical harness connector (4) from the evaporative emission (EVAP) canister vent valve.
3. Disconnect the EVAP vent hose from the EVAP canister vent valve (2).
4. Release the lock tab on the EVAP canister vent bracket and remove the EVAP canister vent valve.
INSTALLATION PROCEDURE
1. Install the EVAP canister vent valve (2) on the EVAP canister vent bracket. Pull on the valve to ensure tab is locked.
2. Connect the EVAP vent hose to the EVAP canister vent valve.