RELAY AWD V6-3.5L VIN L (2006)
7. Remove the center pillar lower trim.
8. Remove the bolt from the seat belt retractor.
9. Remove the seat belt retractor from the center pillar.
10. Remove the front seat belt from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat belt retractor to the center pillar.
2. Install the bolt to the seat belt retractor.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 42 N.m (31 lb ft).
3. Install the center pillar lower trim.