RELAY AWD V6-3.5L VIN L (2006)
Power Steering Pump: Service and Repair
Power Steering Pump Drive Shaft Seal Replacement
Power Steering Pump Drive Shaft Seal Replacement (CB)
Removal Procedure
1. Remove the power steering pump from the vehicle, if necessary.
2. Important:
Protect the drive shaft with the shim stock.
Use a small chisel in order to remove the seal. Discard the seal.
Installation Procedure
1. Lubricate the new drive shaft seal using power steering fluid.
2. Use a deep socket in order to install the new drive shaft seal.
3. Install the power steering pump, if removed.
