RELAY AWD V6-3.5L VIN L (2006)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Reference mark the propeller shaft at the transfer case flange.
3. Remove the propeller shaft-to-transfer case flange bolts.
4. Reference mark the propeller shaft at the torque tube flange.
5. Remove the propeller shaft-to-torque tube flange bolts.
6. Push the propeller shaft toward the rear of the vehicle.
7. Remove the propeller shaft.
Installation Procedure
