RELAY AWD V6-3.5L VIN L (2006)
Wheel Bearing: Service and Repair
Rear Suspension
Wheel Bearing/Hub Replacement - Rear (Independent Rear Suspension)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the knuckle.
4. Remove the wheel bearing/hub assembly knuckle bolts (1).
5. Remove the wheel bearing/hub assembly (1) from the knuckle (2).
Installation Procedure
1. Install the wheel bearing/hub assembly (1) on to the knuckle (2).
