RELAY FWD V6-3.9L VIN 1 (2006)
7. Remove the sliding door handle screws.
8. Remove the lock assembly from the sliding door.
9. Remove the outside handle cable from the lock assembly.
10. Remove the sliding door outside handle bolts.
11. Remove the sliding door outside handle from the sliding door.
12. Remove the outside handle cable from the outside handle.
Installation Procedure
1. Install the outside handle cable to the outside handle.
2. Install the sliding door outside handle to the sliding door.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the sliding door outside handle bolts.
Tighten the bolts, in sequence as shown, to 10 N.m (89 lb in).
