RELAY FWD V6-3.9L VIN 1 (2006)
9. Remove the door module bolts.
10. Pull the door harness through hinge face into door cavity. Remove the door module.
INSTALLATION PROCEDURE
1. Position the front door hardware module to the front door.
2. Align the modular locator pin (1) into the 4-way locating hole (2) in the door structure.
3. Install the front door module screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws, as shown, to 10 N.m (89 lb in).