RELAY FWD V6-3.9L VIN 1 (2006)
Luggage Rack: Procedures
Luggage Carrier Replacement (Extended Wheelbase)
LUGGAGE CARRIER REPLACEMENT (EXTENDED WHEELBASE)
REMOVAL PROCEDURE
1. Remove the front and rear mounting screw caps.
IMPORTANT: Remove the luggage carrier as an assembly.
2. Remove the front and rear mounting screws from the luggage carrier.
3. Remove the center mounting screws, if equipped, from the luggage carrier.
4. Remove the luggage carrier from the roof with an assistant.
INSTALLATION PROCEDURE
1. Position the luggage carrier to the roof with an assistant.
2. Install the center mounting screws, if equipped, to the luggage carrier.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 6 N.m (53 lb in).
3. Install the front and rear mounting screws to the luggage carrier.
Tighten the screws to 6 N.m (53 lb in).
4. Install the front and rear mounting screw caps.
Luggage Carrier Replacement (Regular Wheelbase)
LUGGAGE CARRIER REPLACEMENT (REGULAR WHEELBASE)
REMOVAL PROCEDURE
