RELAY FWD V6-3.9L VIN 1 (2006)
Parking Brake Tensioner: Service and Repair
Park Brake Cable Equalizer Replacement
Removal Procedure
Caution:
Refer to Park Brake Cable to Caliper Caution in Service Precautions.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the left rear park brake cable and adjustment stud assembly from the equalizer assembly by removing the equalizer nut from the
adjustment stud.
3. Disconnect the front park brake cable (1) from the right rear cable (3) at the connector clip (2).
4. Remove the equalizer assembly from the front park brake cable. Insert a flat bladed tool into the equalizer and lightly twist to reposition the
equalizer retaining tab. This will release the assembly from the cable.
Installation Procedure
