RELAY FWD V6-3.9L VIN 1 (2006)
8. Remove the auxiliary blower motor mounting screws.
9. Remove the auxiliary blower motor from the blower motor housing.
INSTALLATION PROCEDURE
1. Install the auxiliary blower motor mounting screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1.6 N.m (14 lb in).
2. Install the auxiliary A/C air distribution duct (2).
3. Install the auxiliary A/C air distribution duct bolts (1).
Tighten the bolts to 10 N.m (89 lb in).