RELAY FWD V6-3.9L VIN 1 (2006)
Hose/Line HVAC: Service and Repair
Heater Pipe Replacement - Auxiliary Rear
HEATER PIPE REPLACEMENT - AUXILIARY REAR
TOOLS REQUIRED
SA9111E Hose Clamp Pliers
REMOVAL PROCEDURE
1. Disconnect the heater inlet and outlet hoses from the auxiliary heater inlet/outlet pipes using SA9111E.
2. Drain the coolant system. Refer to Draining and Filling Cooling System (Static Fill LX9) Draining and Filling Cooling System (Static Fill LZ9)
Draining and Filling Cooling System (Vac-N-Fill).
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the auxiliary heater inlet/outlet pipe clip nut (1).