RELAY FWD V6-3.9L VIN 1 (2006)
Fuel Pressure Release: Service and Repair
Fuel Pressure Gage Installation and Removal
FUEL PRESSURE GAGE INSTALLATION AND REMOVAL
TOOL REQUIRED
J 34730-1A Fuel Pressure Gage
INSTALLATION PROCEDURE
CAUTION:
-
Refer to Gasoline/Gasoline Vapors Caution.
-
Refer to Fuel Gage Leak Caution.
1. Remove the intake manifold cover.
2. Remove the fuel rail pressure fitting cap.
3. Connect the J 34730-1A to the fuel pressure valve. Wrap a shop towel around the fitting while connecting the gage in order to avoid spillage.
4. Place the bleed hose of the fuel pressure gage into an approved gasoline container.
REMOVAL PROCEDURE
1. Remove the bleed hose on the J 34730-1A from the approved container.
2. Remove the shop towel from around the fitting and discard into an approved container.
3. Disconnect the J 34730-1A from the fuel pressure valve.
4. Install the fuel pressure fitting cap.