RELAY FWD V6-3.9L VIN 1 (2006)
3. Install the CKP sensor stud (2).
NOTE: Refer to Fastener Notice.
Tighten the stud to 10 N.m (89 lb in).
4. Connect the engine harness electrical connector to the CKP sensor.
5. Install the exhaust manifold.
3. Install the CKP sensor stud (2).
NOTE: Refer to Fastener Notice.
Tighten the stud to 10 N.m (89 lb in).
4. Connect the engine harness electrical connector to the CKP sensor.
5. Install the exhaust manifold.