RELAY FWD V6-3.9L VIN 1 (2006)
10. Remove the fuel injector (3) from the fuel rail, if required.
11. Remove and discard the fuel injector upper O-ring (2).
INSTALLATION PROCEDURE
IMPORTANT: DO NOT reuse the fuel injector O-ring seals. Install NEW O-ring seals during assembly.
1. The fuel injector (1) is stamped with a part number identification (2).
IMPORTANT: Ensure to use the correct part number when ordering the replacement fuel injectors.
2. Lubricate the NEW injector O-rings (2) with clean engine oil.
3. Install the NEW fuel injector upper O-ring (2).
4. Install the fuel injector (3) to the fuel rail, if required.
5. Install the fuel injector retaining clip (1), if required.
6. Lubricate the NEW lower injector O-rings with clean engine oil.
NOTE:
-
Use care when servicing the fuel system components, especially the fuel injector electrical connectors, the fuel injector tips, and the injector