RELAY FWD V6-3.9L VIN 1 (2006)
Air Flow Meter/Sensor: Service and Repair
MASS AIRFLOW SENSOR/INTAKE AIR TEMPERATURE SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the engine harness electrical connector (1) from the mass air flow (MAF)/intake air temperature (IAT) sensor.
2. Remove the air cleaner outlet duct.
3. Remove the MAF/IAT sensor (2) bolts.
4. Remove the MAF/IAT sensor (2) from the air filter housing.
INSTALLATION PROCEDURE
1. Install the MAF/IAT sensor (2) to the air filter housing.
2. Install the MAF/IAT sensor (2) bolts.