RELAY FWD V6-3.9L VIN 1 (2006)
7. Install the positive battery cable to the starter motor "BAT" terminal.
8. Install the starter motor "BAT" terminal nut (5).
Tighten the nut to 17 N.m (13 lb ft).
9. Install the radiator air baffle.
10. Install the I/P wiring harness (4) terminal and the positive battery cable (3) terminal to the junction block stud (2).
11. Install the positive battery cable to junction block nut (1).
Tighten the nut to 10 N.m (89 lb in).
