RELAY FWD V6-3.9L VIN 1 (2006)
3. Install the bodyside window latch hinge screw to the window.
Tighten the screw (2) to 1.6 N.m (1.4 lb in).
4. Install the bodyside window in the opening.
5. Install the bodyside window hinge nuts (2) to the body.
Tighten the nuts (2) to 3.5 N.m (1.6 lb in).
6. Use J 34946 or equivalent in order to install the latch hinge pin.
7. Install the bodyside window latch hinge pin (4) to the latch (3).
8. Inspect the bodyside window for proper operation.
9. Close the bodyside window.
10. Install the body side rear upper garnish molding. Refer to Trim Panel Replacement - Body Lock Pillar Upper (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair/Removal and Replacement) in Interior Trim.
11. Install the bodyside window garnish molding. Refer to Finish Panel Replacement - Upper Rear Trim (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Removal and Replacement) in Interior Trim.
12. Remove the masking tape from around the perimeter of the painted surfaces and inner trim of the window.
