SC1 L4-1.9L SOHC VIN 8 (1997)
6. Remove powertrain support dolly.
7. Lower vehicle enough to allow underhood access and remove engine support bar.
8. Install transaxle strut-to-midrail bolt.
-
Torque: 70 Nm (52 ft. lbs.)
9. Remove cooling module support wire.
10. Install air box with three fasteners.
-
Torque: 10 Nm (89 inch lbs.)
11. Install resonator and secure with plastic push pin.
12. Connect electrical connector at the intake air temperature (IAT) sensor.
13. Install air cleaner housing cover and clean air inlet tube.
14. Connect fresh air hose at cam cover.
15. Secure clamp at throttle body assembly.
