saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Paint - Bumps or Iron Dust on Paint Surface|Page 9855 > < Paint - Bumps or Iron Dust on Paint Surface|Page 9853
Page 8
background image

[email protected]
E038 Fallout Gel or E038E Liquid Fallout Remover II available from:

Valvoline Car Brite Company
1910 South State Avenue
Indianapolis, In 46203
(800) 347-2439 (Toll Free) or (317) 788-9925 (Local)
Fax (317) 788-9930
www.carbrite.com
[email protected]
*We believe these sources and their products to be reliable. There may be additional manufacturers of such products. General Motors does not endorse,
indicate any preference for or assume any responsibility for the products from these firms or for any such items which may be available from other
sources.

If rail dust remover is not available in your area, call one of the numbers listed above for a distributor near your location.

Warranty Information (excluding Saab U.S. Models)

Important
Refer to the Policy & Procedures Manual, section 1.2.1.7 for detailed information regarding warranty coverage for this condition.

Important
In certain cases where the vehicle finish is severely damaged and the actual repair time exceeds the published time, the additional time should
be submitted in the "Other Labor Hours" field.

Warranty Information (Saab U.S. Models)

Disclaimer

Technical Service Bulletin # 96-T-45

Date: 960801

Paint - Front Side Marker Rubs Paint From Lower Fascia

BULLETIN NO.: 96-T-45

ISSUE DATE: August, 1996

GROUP/SEQ. NO.: Body-15

CORPORATION NO.: 681510R

SUBJECT: 
Front Side Marker/Turn Signal/Park Lamp Rubs Paint from Lower Fascia at Lower Rear of Lamp Assembly (Add Shim and Remove Excessive Boilout
from Lamp Assembly)

Paint - Bumps or Iron Dust on Paint Surface|Page 9855 > < Paint - Bumps or Iron Dust on Paint Surface|Page 9853