SC2 L4-1.9L DOHC VIN 7 (1996)
Throttle Body Connections
Fuel/Vapor Hose Routing - DOHC
VACUUM HARNESS ASSEMBLY REMOVAL
1. Remove air intake tube and air box cover.
2. Remove accelerator control cable bracket attaching bolts.
3. Disconnect vacuum harness from EVAP canister purge solenoid and fuel system pressure regulator.
NOTE: The vacuum harness is serviced.
4. Remove vacuum harness from throttle body by unclipping the two tangs and lifting it upward.
INSTALLATION
1. Install the throttle body vacuum harness connector.