SC2 L4-1.9L DOHC VIN 7 (1996)
9. Check seal on mirror assembly for proper location and install mirror assembly to door. Install nuts and tighten.
Torque: 10 N.m (89 in-lbs)
10. If equipped with passenger side power mirror, connect harness connector and install connector position assurance (CPA) device.
11. Install foam filler mirror patch area.
12. On driver's side, install mirror cable into trim panel and tighten set screw.
Torque: 3 N.m (27 in-lbs)
13. Install trim panel to door frame with screw and tighten.
14. Install removed portion of window frame garnish by pushing to seat in channel.
