Sky L4-2.0L Turbo (2008)
5.
Do not remove the tape from the back side of the weatherstrip. Install the weatherstrip with the flat side toward the B pillar pin hole. In the photo
above, the weatherstrip is not on the vehicle and trimmed up to show the position of the inner strip.
6.
Apply a small amount of Weatherstrip Adhesive Gel-Black to the weatherstrips. In the photo above, the weatherstrip is not on the vehicle and
trimmed up to show the area to apply the adhesive.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table above.
